Mr. Muhammad Ali

Muhammad Ali is a Lecturer and Laboratory Manager at the Materials Research Laboratory (MRL), Department of Physics, University of Peshawar. With over a decade of expertise spanning higher education, research, and laboratory engineering, he also serves as an Official Mentor for the Pakistan Science Foundation (PSF) under the Ministry of Science and Technology. He holds an MSc in Electronics with Distinction from the University of Peshawar and an MS in Electronic Engineering from the GIK Institute, where his research focused on photovoltaic parameters and solar characterization. To date, Mr. Ali has built a strong academic footprint featuring 24 peer-reviewed journal publications with a cumulative Impact Factor (IF) exceeding 74, one international patent for a solar hybrid thermoelectric collector, and presentations at several national and international conferences. Furthermore, he has a proven track record as a team lead, securing and executing four national and international research projects worth over PKR 46 million.

As a laboratory manager, Mr. Ali possesses deep hands-on technical command over high-end characterization and analytical equipment, including:

• Spectroscopy & Diffraction: Photoluminescence (PL), UV-Vis-NIR, FTIR, and X-ray Powder Diffraction (XRD).
• Energy & Electrical Characterization: Solar cell simulators, Quantum Efficiency Measurement Systems (IPCE/EQE/IQE), LCR meters, and high-temperature Impedance/Network Analyzers.
• Advanced Synthesis: Electrospinning nanofiber plants, RF/DC Magnetron sputtering, thin-film spin coaters, and high-temperature glass-melting and tube furnaces.
• Environmental Monitoring: Raman LIDAR (532 nm), Sun Photometers, Pyranometers, and Aethalometers.

1. Muhammad Ali, Shahid Ali, Haroon ur Rashid, Yaseen Iqbal,"Improvement in solar cells efficiency with luminescent downshifting nanocomposite lamination: A green alternative for ethylene–vinyl acetate,Solar Energy",Volume 282, November 2024,112986,ISSN 0038-092X, https://doi.org/10.1016/j.solener.2024.112986. (IF=6.8)
2. Bibi, J., Uzair, M., Hussain, M. Ali et al. Electrospun luminescent carbon dots and poly methyl methacrylate composite nanofibers (CDs/PMMA-CNFs) for their potential applications in UV sensing. J Mater Sci: Mater Electron 37, 977 (2026). https://doi.org/10.1007/s10854-026-17368-9 (IF=2.9)
3. M.Ali,Mahmood.K, Khasan.S.Karimov,” Design of a cost-efficient PV parameters Monitoring system”, Sci., Tech. and Dev., 31 (3): 244-250, ISSN 0254-6418, 2012. https://docsdrive.com/pdfs/std/std/2012/244-250.pdf.
4. Khasan S. Karimov, МuhammadAbid, Muhammad Saleem, Khakim M. Akhmedov, Muhammad M. Bashir, Umar Shafique, Muhammad M. Ali, Temperature gradient sensor based on CNT composite, Physica B: Condensed Matter, Volume 446, 1 August 2014, Pages 39-42, ISSN 0921-4526. (IF=2.988)    https://doi.org/10.1016/j.physb.2014.04.018
5. Khasan Skarimov, Muhammadabid³, Dur-E-Zehra Baig, Syed A  Moiz, Adam Khan, T. A. Qasuria, Khakimma Khmedov, Muhammad Ali and Umair Rao, “Combined Photo-Electric Cell and Thermoelectric Generator for Demonstrative Purposes” Academia Journal of Scientific Research 5(1): 022-033, January 2017, ISSN 2315-7712. (IF 4.003) https://doi.org/10.15413/ajsr.2017.0160  https://www.academiapublishing.org/journals/ajsr/instructions
6. Hayat, Khizar, Falak Niaz, Shahid Ali, M. Javid Iqbal, M. Ajmal, M. Ali, and Yaseen Iqbal. 2016. “Thermoelectric Performance and Humidity Sensing Characteristics of La2CuO4 Nanofibers.” Sensors and Actuators, B: Chemical 231:102–9. (IF=9.221)  https://doi.org/10.1016/j.snb.2016.02.127
7. Khizar Hayat, S. Shaheen Shah, M. Yousaf, M. Javid Iqbal, M. Ali, S. Ali, Muhammad Ajmal, Yaseen Iqbal, Processing, device fabrication and electrical characterization of LaMnO₃ nanofibers, Materials Science in Semiconductor Processing, Vol 41, pp. 364-369, 20 Nov 2016. (IF=4.644)    https://doi.org/10.1016/j.mssp.2015.10.009
8. Muhammad Asif, M. Ali, Naveed Ahmad, Sana Ul Haq, Tariqullah Jan and Muhammad Arshad, Design and Development of a Data Logger Based on IEEE 802.15.4/ZigBee and GSM, Proceedings of the Pakistan Academy of Sciences: Pakistan Academy of Sciences A. Physical and Computational Sciences 53 (1): 37–48 (2016) ISSN: 2518-4245. (IF=0.4)   https://ppaspk.org/index.php/PPAS-A/article/view/346
9. Shahid Ali, Younas Khan, Yaseen Iqbal, M Ali, Size determination of gold nanoparticles in silicate glasses by UV–Vis spectroscopy, Journal of Nanophotonics. 11(1), 016011 (Mar 08, 2017). (IF=1.494)  https://doi.org/10.1117/1.JNP.11.016011
10. K. Malook, Ihsan-ul-Haque, M. Khan, and M. Ali, “Polypyrrole-CuO based composites, promotional effects of CuO contents on polypyrrole characteristics,” J. Mater. Sci. Mater. Electron., vol. 0, no. 0, p. 0, 2019. (IF=2.779) https://doi.org/10.1007/s10854-019-00673-x
11. Mahmood Khan, Javed Iqbal, M Ali, Afaq Muhmmad, Ali Zahir,Nadir Ali “Designing and implementation of energy-efficient wireless photovoltaic monitoring system,” Trans. Emerg. Telecommun. Technol., no. April, pp. 1–11, 2019. (IF=3.41)  https://doi.org/10.1002/ett.3685  
12. Bubli, Irum, Ali, Shahid, Ali, M, Hayat, Khizar, Iqbal, Yaseen, Zulfiqar, Syed Cattaruzza., “Enhancement of solar cell efficiency via luminescent downshifting by an optimized coverglass,” Ceram. Int., no. September, pp. 1–6, 2019.  (IF=3.45)  https://doi.org/10.1016/j.ceramint.2019.09.193  
13. K. Malook, H. Khan, and M. Ali, “Materials Science in Semiconductor Processing Investigation of room temperature humidity sensing performance of mesoporous CuO particles,” Mater. Sci. Semicond. Process., vol. 113, no. January, p. 105021, 2020.  (IF=3.927) https://doi.org/10.1016/j.mssp.2020.105021
14. R. Aman Qazi, M. Saleem Khan, M. Siddiq, R. Ullah, L. Ali Shah, and M. Ali, “Synthesis and characterization of functionalized MWCNTs/PMMA composites: device fabrication for RH sensing,” Polym. Technol. Mater., vol. 59, no. 14, pp. 1608–1620, 2020. (IF=1.973) https://doi.org/10.1080/25740881.2020.1759631
15. Malook, K., Ali, M., & Ul-Haque, I. (2021). Elucidation of room temperature humidity sensing properties of Mn2O3 particles. Applied Physics A, 127(10), 758. https://doi.org/10.1007/s00339-021-04909-8 (IF=2.584)
16. Hussain, M., Hasnain, S., Khan, N. A., Bano, S., Zuhra, F., Ali, M., Khan, M., Abbas, N., & Ali, A. (2021). Design and Fabrication of a Fast Response Resistive-Type Humidity Sensor Using Polypyrrole (Ppy) Polymer Thin Film Structures. Polymers, 13(18), 3019. https://doi.org/10.3390/polym13183019 (IF=4.329)
17. Rashid, H. U., Ali. M, Synthesis and Fabrication of Polyvinyl Alcohol Nanofibers Based Capacitive Relative Humidity Sensor. Sir Syed University Research Journal of Engineering & Technology, ., (2021). 11(01). https://doi.org/10.33317/ssurj.303.
18. Rashid, H. U., Ali, M., Sarker, M. R., Md Ali, S. H., Akhtar, N., Khan, N. A., Asif, M., & Shah, S. (2021). Synthesis, characterization, and applications of silver nanofibers in humidity, ammonia, and temperature sensing. Micromachines, 12(6). https://doi.org/10.3390/mi12060682 (IF=2.891)
19. K. Bibi, I. Ahmad, K. Hayat, M. Ali, and S. K. Shah, “Simulation and Experimental Device Performance Analysis of TiO2Based Inverted Organic Solar Cells,” J. Electron. Mater., vol. 51, no. 9, pp. 5181–5187, 2022, https://doi:10.1007/s11664-022-09757-7. (IF=2.047)
20. Sommya Fazal, Falak Zaman, Shahid Ali, Yaseen Iqbal, N. Chanithima, S. Tuscharoen, Muhammad Ali, Khizar Hayat, Syed Zulfiqar, Muhammad Arshad, A. El-Denglawey, J. Kaewkhao,”Investigation of europium-doped aluminum phosphate glass for a red light generation”,Ceramics International,Volume 48, Issue 17,2022,Pages 24751-24757, ISSN 0272-8842, https://doi.org/10.1016/j.ceramint.2022.05.124. (IF=5.532)
21. Fayaz, Muhammad, Shahid Ali, Salma Bibi, Yaseen Iqbal, Muhammad Ali, Falak Zaman, Gul Rooh, Mohamed Fadhali, and J. Kaewkhao. 2023. “Luminescence and Energy Transfer Mechanism in Ce3+ and Gd3+ Ions in Bismuth Borate Glass.” Ceramics International. https://doi:10.1016/J.CERAMINT.2023.04.127. (IF=5.532)
22. Ahmad, Jebran, Muhammad Yaseen, Haq Zia, Muhammad Ali, Latif Ur, and Ata Ur. 2023. “Designing Copper – Nickel Hybrid Nanoparticles Based Resistive Sensor for Ammonia Gas Sensing.”Materials Chemistry and Physics 305(April):127868. https://doi:10.1016/j.matchemphys.2023.127868. (IF=4.788)
23. Shah, Yousaf Ali, Mutabar Shah, Khan Malook, Afzal Khan, and Muhammad Ali. 2023. “Fabrication and Characterizations of Ultra‑Sensitive Capacitive / Resistive Humidity Sensor Based on CNT ‑ Epoxy Nanocomposites.” Journal of Materials Science (0123456789).https://link.springer.com/article/10.1007/s10853-023-08926-1. (IF=4.5)
24. Hamza Ali, Muhammad Uzair, Yaseen Iqbal, Muhammad Ali, Waqas Ahmad, “Electrical properties of Barium titanate and graphite incorporated PVA matrix composite (PVA-BaTiO3-G) nanofibers”, Materials Science and Engineering: B, Volume 296, 2023, 116655, ISSN 0921-5107, https://doi.org/10.1016/j.mseb.2023.116655. (IF=3.9)

1. 21 Days of training on Teaching and Research Andragogy, at Higher Education Commission Peshawar conducted by National Institute of Higher Education, (NAHE) 
2. 3 Days Training on Renewable Energy Technologies, Pakistan Council of Renewable Energy Technology, Islamabad, Pakistan 
3. 20 Days of hands-on Training on Advanced HMI, PLC & SCADA Programming at the National Institute of Electronics, Ministry of Science and Technology Pakistan. 
4. One month of hands-on training on Chip design based on FPGAs at Skill Development Council Islamabad, Pakistan. 
5. 10 Days Training in PCB Designing and Fabrication at the University of Peshawar institute of physics and electronics.